View 9368_8414952.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

industrial automation & process control cables 18.41 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables ?overview construction soft annealed bare or tinned copper with pvc flame retardant insulation and jacket. other insulation and jacket options are available (see table below). communication wire included on all multi-pair/multi-triad 1000 and 3000 series part numbers, 22 awg (7x30) bare copper, orange pvc insulation. nylon rip cord included in all pvc/pvc instrumentation cables. other construction options: armoring capabilities belden also has the capability to protect electronic, instrumentation and control cables with interlocking or continuous armor and smooth or corrugated protective metal tapes. application cable jackets are resistant to sunlight, moisture and vapor penetration. pvc/pvc constructions, with 3 conductors or more and 20 awg or larger, are suitable for direct burial. unshielded twisted non-shielded pairs and triads provide a minimal od allowing greater tray and conduit fill. non-shielded instrument pairs may be utilized when recommended by the instrument manufacturer and used in a metallic conduit. overall shield recommended for use in instrumentation applications where signals are transmitted in excess of 100 millivolts except in areas where high voltage and current sources create excessive noise interference. the beldfoil shield with drain wire provides 100% coverage for maximum shield effectiveness. individually shielded and overall shielded individually shielded pairs or triads with an overall shield are recommended for use in instrumentation applications where optimum noise rejection is required. individual pair/triad shields are fully isolated from each other and contain a separate drain wire for grounding, to provide maximum protection from crosstalk and common mode interference. cables with an overall shield provide additional electrostatic noise protection. specifications ul subject 13 ul subject 2250 nec article 725 class 2 and class 3 circuits nec type pltc listed, which is approved for cable tray use in class 1, division 2, hazardous areas and non-hazardous areas, cable trays, raceways, conduit and supported by messenger wires. sunlight-resistant. oil-resistant per ul class 43 nec type itc per article 727. itc cables may carry up to 5 amps at 150v, which is significantly greater than that allowed for pltc only cables. itc cables may also be installed in specific applications, per the nec, in addition to those allowed for pltc. ul 1685 (ul 1581) vertical tray flame test comparable to ieee 383 -1974 (70,000 btu/hr.) flame test. pvc/pvc constructions are cmg, ft4, ieee 1202 and ieee 383-2003 rated, and meet icea t-29-520 flame test. design options ? call 1-800-belden-1 or 1-800-belden-3. pltc-er as an option, belden offers all pvc insulated, pvc jacketed instrumentation cables, and several other insulation and jackets, with a pltc-er (exposed run) rating, formerly referred to as open wiring. per nec article 725, a pltc-er rated cable may be installed in an industrial establish- ment between a cable tray and the utilization equipment or device. a pltc-er rated cable must meet the crush and impact require- ments of ul type mc cable by eliminating the need for metal conduit and/or armor, using a pltc-er rated cable results in savings in both installation and maintenance. ul listed for pltc insulation/jacket max. temp rating xlpe/pvc 90? xlpe/cpe 90? pvc/pvc 105? pvc/cpe 105? pe/pvc 75? fpe/pvc 75? tpe/tpe 105? xlpe/haloarrest 90? standard lengths may be subject to tolerance. custom lengths may be available upon request. contact the belden electronics division customer service department for additional information. 1-800-belden-1 or 1-800-belden-3. armor code material 2 aluminum interlock 3 steel interlock 8 continuously corrugated aluminum overall jacket code material 1 pvc 3 cpe 4 tpe 5 hdpe 6 oil res ii 7 haloarrest i 1 2 3456 overall armor core jacket type trade type number to specify part number
industrial automation & process control cables 18.42 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets 22 awg pairs stranded (7x30) tinned copper conductors ?twisted pairs unshielded ?pvc insulation ?chrome pvc jacket 9407 1 e2 u-500 u-152.4 10.0 4.3 .037 .94 .198 5.03 19 84 2.00 50.80 u-1000 u-304.8 19.0 8.2 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9322 1 e2 u-500 u-152.4 11.0 5.0 .037 .94 .201 5.10 28 124 2.00 50.80 u-1000 u-304.8 22.0 10.0 9512 2 e2 500 152.4 22.0 10.0 .042 1.07 .310 7.82 46 204 3.00 76.20 1000 304.8 42.0 19.1 9513 3 e2 500 152.4 26.5 11.6 .042 1.07 .324 8.23 63 280 3.25 82.55 1000 304.8 51.0 23.2 9514 4 e2 500 152.4 33.0 14.8 .042 1.07 .356 9.04 80 355 3.50 88.90 1000 304.8 67.0 30.5 9516 6 e2 500 152.4 45.0 20.4 .053 1.35 .418 10.62 118 524 4.25 107.95 1000 304.8 89.0 40.4 9520 9 e2 500 152.4 64.5 29.3 .053 1.35 .482 12.29 172 765 4.75 120.65 1000 304.8 121.0 55.0 9521 11 e2 500 152.4 73.0 32.7 .053 1.35 .506 12.85 200 889 5.35 135.89 1000 304.8 147.0 66.4 9524 15 e2 500 152.4 89.5 40.7 .053 1.35 .594 15.09 280 1245 6.00 152.40 1000 304.8 178.0 80.9 9526 19 e2 500 152.4 114.5 52.0 .063 1.60 .644 16.36 350 1557 6.33 160.78 1000 304.8 224.0 101.8 9527 27 e2 500 152.4 156.5 71.1 .063 1.60 .763 19.38 500 2224 7.50 190.50 1000 ? 304.8 321.0 145.9 22 awg pairs stranded (7x30) bare copper conductors* ?twisted pairs overall beldfoil shield (100% coverage) ?pvc insulation ?pvc jacket (black or chrome) 3000a** 2 e1 bulk ?? bulk .043 1.09 .310 7.87 46 204 3.00 76.20 3004a** 4 e1 bulk ?? bulk .042 1.07 .357 9.01 80 355 3.50 88.90 3006a** 8 e1 bulk ?? bulk .053 1.35 .450 11.43 172 765 4.75 120.65 3008a** 12 e1 bulk ?? bulk .053 1.35 .536 13.61 210 934 5.00 127.00 3010a** 16 e1 bulk ?? bulk .053 1.35 .594 15.09 290 1290 6.00 152.40 3012a** 24 e1 bulk ?? bulk .065 1.65 .749 19.02 440 1957 7.50 190.50 3014a** 50 e1 bulk ?? bulk .075 1.91 1.017 25.80 915 4070 9.50 241.30 pvc = polyvinyl chloride *for tinned copper conductors, order with b suffix. **for exposed run rated cable (3000 series only), order with e suffix, e.g. 3000ae. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. e1, e2 = refer to industrial technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs lbs. kg inch mm rip cord drain wire drain wire rip cord communication wire rip cord nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520
industrial automation & process control cables 18.43 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets 22 awg pairs stranded (7x30) tinned copper conductors ?twisted pairs individually shielded ?pvc insulation ?chrome pvc jacket 9328 2 e2 500 152.4 23.5 10.2 .042 1.07 .323 8.20 54 240 3.00 76.20 1000 304.8 46.0 20.9 9329 3 e2 500 152.4 29.5 13.4 .042 1.07 .341 8.66 54 240 3.50 88.90 1000 304.8 60.0 27.3 9330 4 e2 500 152.4 39.0 17.7 .042 1.07 .372 9.45 110 489 3.50 88.90 1000 304.8 75.0 34.0 9331 6 e2 500 152.4 55.0 24.5 .053 1.35 .457 11.61 101 449 4.33 109.98 1000 304.8 111.0 50.4 9332 9 e2 500 152.4 75.0 34.1 .053 1.35 .530 13.46 160 711 5.00 127.00 1000 304.8 145.0 65.9 9333 11 e2 500 152.4 89.0 40.5 .053 1.35 .592 15.04 160 711 5.50 139.70 1000 304.8 177.0 80.5 9335 19 e2 500 152.4 141.5 64.3 .063 1.60 .711 18.06 264 1174 6.50 165.10 1000 304.8 287.0 130.5 22 awg pairs stranded (7x30) bare copper conductors* ?twisted pairs individually shielded + overall beldfoil shield (100% coverage) ?pvc insulation ?pvc jacket (black or chrome) 3001a ? 2 e1 bulk ?? bulk .042 1.07 .324 8.23 54 240 3.25 82.55 3005a ? 4 e1 bulk ?? bulk .043 1.09 .360 9.14 115 511 3.50 88.90 3007a ? 8 e1 bulk ?? bulk .053 1.35 .497 12.62 250 1112 5.25 133.35 3009a ? 12 e1 bulk ?? bulk .053 1.35 .570 14.48 300 1334 5.75 146.05 3011a ? 16 e1 bulk ?? bulk .064 1.63 .674 17.12 350 1557 6.25 158.75 3013a ? 24 e1 bulk ?? bulk .065 1.65 .800 20.32 540 2402 8.00 203.20 3015a ? 50 e1 bulk ?? bulk .075 1.91 1.050 26.67 1330 5916 10.50 266.70 22 awg triads stranded (7x30) tinned copper conductors ?twisted triads unshielded ?pvc insulation ?chrome pvc jacket 9491 1 e1 u-500 u-152.4 12.5 5.7 .037 .94 .208 5.28 29 129 2.00 50.80 u-1000 u-304.8 23.0 10.4 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9363 1 e1 u-500 u-152.4 13.5 6.1 .037 .94 .208 5.28 29 129 2.00 50.80 u-1000 u-304.8 26.0 11.8 22 awg triads stranded (7x30) bare copper conductors* ?twisted triads overall beldfoil shield (100% coverage) ?pvc insulation ?pvc jacket (black or chrome) 3002a 2 e1 bulk ?? bulk .043 1.09 .330 8.38 62 275 3.50 88.90 individually shielded + overall beldfoil shield (100% coverage) ?pvc insulation ?pvc jacket (black or chrome) 3003a 2 e1 bulk ?? bulk .043 1.09 .330 8.38 82 364 3.25 82.55 *for tinned copper conductors, order with b suffix. e1, e2 = refer to technical information section for color code. alternate co lor coding available upon request. ? for exposed run rated 3000 series cables, order with ??suffix, e.g. 3001ae. multiple pair or triad cables have each pair/tria d numbered for ease of identification. ?? bulk = check length available for specific construction. standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs/ triads lbs. kg inch mm rip cord rip cord rip cord rip cord communication wire rip cord communication wire drain wires drain wires drain wire drain wire rip cord communication wire nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 drain wires for exposed run rated cable, order 3003ae for exposed run rated cable, order 3002ae
industrial automation & process control cables 18.44 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets 20 awg pairs stranded (19x32) tinned copper conductors ?twisted pairs unshielded ?pvc insulation ?chrome pvc jacket 9408 1 e2 u-500 u-152.4 12.0 5.5 .037 .94 .214 5.44 31 138 2.00 50.80 u-1000 u-304.8 23.0 10.4 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9320 1 e2 u-500 u-152.4 14.5 6.6 .037 .94 .217 5.51 40 178 2.00 50.80 u-1000 u-304.8 28.0 12.7 20 awg pairs stranded (7x28) bare copper conductors ?twisted pairs overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (see chart below for other options) 1033a 1 e1 1000 304.8 30.0 13.6 .037 .94 .213 5.41 42 187 2.25 57.15 10000 ? 3048.0 270.0 122.5 3016a 2 e1 bulk ?? bulk .042 1.07 .332 8.43 92 409 3.75 95.25 1056a 4 e1 10000 ? 3048.0 820.0 372.0 .053 1.35 .408 10.36 135 601 4.25 107.95 1057a 8 e1 10000 ? 3048.0 1410.0 640.2 .053 1.35 .472 11.99 247 1099 5.00 127.00 1058a 12 e1 7500 ? 2286.0 1455.0 660.0 .053 1.35 .564 14.33 359 1597 6.00 152.40 1059a 16 e1 5000 ? 1524.0 1275.0 578.9 .064 1.63 .649 16.48 232 1032 6.50 165.10 1060a 24 e1 5000 ? 1524.0 1735.0 787.7 .064 1.63 .786 19.96 695 3092 8.25 209.55 1061a 36 e1 2500 ? 762.0 1300.0 590.2 .074 1.88 .960 24.38 1031 4587 10.00 254.00 1062a 50 e1 2500 ? 762.0 1825.0 827.8 .074 1.88 1.117 28.37 1423 6330 11.50 292.10 individually shielded + overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (other options below) 1075a 2 e1 10000 ? 3048.0 650.0 294.8 .042 1.07 .337 8.56 97 432 3.75 95.25 1076a 4 e1 7500 ? 2286.0 787.5 357.5 .053 1.35 .411 10.44 171 761 4.50 114.30 1077a 8 e1 7500 ? 2286.0 1297.5 588.6 .053 1.35 .514 13.06 320 1424 5.50 139.70 1078a 12 e1 7500 ? 2286.0 1942.5 881.1 .064 1.63 .637 16.18 468 2082 6.75 171.45 1079a 16 e1 5000 ? 1524.0 1555.0 705.4 .064 1.63 .704 17.88 617 2745 7.50 190.50 1091a 20 e1 bulk ?? bulk .064 1.63 .780 19.81 765 3403 8.25 209.55 1080a 24 e1 2500 ? 762.0 1142.5 518.2 .074 1.88 .863 21.92 914 4066 9.00 228.60 1081a 36 e1 2000 ? 609.6 1436.0 651.9 .074 1.88 1.035 26.29 1359 6046 10.50 266.70 1082a 50 e1 2000 ? 609.6 1858.0 843.5 .074 1.88 1.215 30.86 1878 8355 12.75 323.85 f-r = flame-retardant ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. e1, e2 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs lbs. kg inch mm rip cord rip cord drain wire drain wire rip cord rip cord communication wire communication wire drain wires nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc/pvc cd xlpe/pvc kl tpe/tpe qr xlpe/cpe st xlpe/haloarrest **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
industrial automation & process control cables 18.45 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets 20 awg triads stranded (19x32) tinned copper conductors ?twisted triads unshielded ?pvc insulation ?chrome pvc jacket 9492 1 e1 u-500 u-152.4 15.5 7.0 .037 .94 .225 5.72 46 205 2.25 57.15 u-1000 u-304.8 29.0 13.2 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9364 1 e1 u-500 u-152.4 17.0 7.7 .037 .94 .228 5.79 46 205 2.25 57.15 u-1000 u-304.8 32.0 14.5 20 awg triads stranded (7x28) bare copper conductors ?twisted triads overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (see chart below for other options) 1526a 1 e1 10000 ? 3048.0 310.0 140.6 .037 .94 .215 5.46 42 187 2.20 55.88 3017a 2 e1 bulk ?? bulk .055 1.40 .360 9.14 97 432 3.60 91.44 3020a 4 e1 bulk ?? bulk .055 1.40 .470 11.94 174 774 4.75 120.65 3021a 8 e1 bulk ?? bulk .055 1.40 .560 14.22 330 1468 5.00 127.00 3022a 12 e1 bulk ?? bulk .066 1.68 .710 18.03 485 2158 7.00 177.80 3023a 16 e1 bulk ?? bulk .064 1.63 .821 20.85 600 2669 7.75 196.85 3024a 24 e1 bulk ?? bulk .074 1.88 1.031 26.19 920 4093 9.25 234.95 individually shielded + overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (other options below) 3018a 2 e1 bulk ?? bulk .055 1.40 .372 9.45 102 454 3.75 95.25 1083a 4 e1 10000 ? 3048.0 1410.8 640.9 .053 1.35 .451 11.46 228 1014 4.50 114.30 1084a 8 e1 7500 ? 2286.0 1755.0 796.1 .064 1.63 .575 10.81 432 1922 5.75 146.05 1085a 12 e1 5000 ? 1524.0 1735.0 787.0 .064 1.63 .714 18.14 636 2829 7.15 181.61 1092a 16 e1 bulk ?? bulk .064 1.63 .793 20.14 841 3741 7.90 200.66 1086a 24 e1 2500 ? 762.0 1602.5 726.9 .074 1.88 .992 25.20 1250 5561 9.90 251.46 3067a 36 e1 bulk ?? bulk .074 1.88 1.292 32.82 1875 6273 13.00 330.20 ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. e1 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of triads lbs. kg inch mm rip cord rip cord drain wire drain wire drain wires rip cord communication wire communication wire rip cord conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc/pvc cd xlpe/pvc kl tpe/tpe qr xlpe/cpe st xlpe/haloarrest **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify: nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520
industrial automation & process control cables 18.46 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets 18 awg pairs stranded (19x30) tinned copper conductors ?twisted pairs unshielded ?pvc insulation ?chrome pvc jacket 9409 1 e2 u-500 u-152.4 15.0 6.8 .037 .94 .230 5.84 49 218 2.25 57.15 u-1000 u-304.8 28.0 12.7 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9318 1 e2 u-500 u-152.4 17.5 7.9 .037 .94 .233 5.92 60 267 2.25 57.15 u-1000 u-304.8 33.0 15.0 9552 2 e2 500 152.4 35.5 16.1 .042 1.07 .368 9.34 65 289 3.70 93.98 1000 304.8 69.0 31.4 9553 3 e2 500 152.4 49.5 22.0 .053 1.35 .411 10.44 145 645 4.10 104.14 1000 304.8 98.0 49.4 9554 4 e2 500 152.4 57.0 25.8 .053 1.35 .447 11.35 187 832 4.50 114.30 1000 304.8 112.0 50.8 9556 6 e2 500 152.4 78.5 35.7 .053 1.35 .497 12.62 270 1201 5.00 127.00 1000 304.8 153.0 69.5 9559 9 e2 500 152.4 108.0 49.0 .053 1.35 .579 14.71 395 1757 5.80 147.32 1000 304.8 215.0 97.6 9563 11 e2 500 152.4 133.0 60.4 .063 1.60 .665 16.89 478 2126 6.75 171.45 1000 304.8 270.0 122.5 9565 15 e2 500 152.4 169.0 76.8 .063 1.60 .739 18.77 640 2847 7.50 190.50 1000 304.8 342.0 155.5 individually shielded (100% coverage) ?pvc insulation ?chrome pvc jacket 9368 2 e2 500 152.4 37.5 17.0 .042 1.07 .378 9.60 125 556 3.75 95.25 1000 304.8 73.0 33.2 9369 3 e2 500 152.4 55.0 25.0 .053 1.35 .423 10.74 220 979 4.25 107.95 1000 304.8 109.0 49.5 3029a 4 e1 bulk ? bulk .053 1.35 .461 11.71 296 1317 4.50 114.30 9388 4 e2 500 152.4 71.5 32.5 .053 1.35 .461 11.71 296 1317 4.60 116.84 1000 304.8 135.0 61.4 9389 6 e2 500 152.4 97.0 44.1 .053 1.35 .538 13.67 440 1957 5.25 133.35 1000 304.8 190.0 86.4 9390 9 e2 500 152.4 137.5 63.0 .064 1.63 .652 16.56 666 2963 6.50 165.10 1000 304.8 270.0 123.6 9391 11 e2 500 152.4 158.5 72.0 .064 1.63 .729 18.52 815 3626 7.25 184.15 1000 304.8 321.0 145.9 9392 15 e2 500 152.4 209.0 95.0 .064 1.63 .808 20.52 1100 4893 8.00 203.20 1000 304.8 428.0 194.5 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? bulk = check length available for specific construction. standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs lbs. kg inch mm rip cord rip cord rip cord drain wire drain wire nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc/pvc cd xlpe/pvc kl tpe/tpe qr xlpe/cpe st xlpe/haloarrest **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
industrial automation & process control cables 18.47 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets 18 awg pairs stranded (7x26) bare copper conductors ?twisted pairs overall beldfoil shield (100% coverage) ? pvc insulation ? black pvc jacket (see chart below for other options) 1032a 1 e1 1000 304.8 38.0 17.2 .037 .94 .233 5.92 67 298 2.50 63.50 10000 ? 3048.0 380.0 172.5 3025a 2 e1 10000 ? 3048.0 760.0 344.7 .042 1.07 .375 9.53 121 538 3.50 88.90 1529a 3 e1 7500 ? 2286.0 735.0 333.4 .053 1.35 .415 10.54 165 734 4.25 107.95 1466a 4 e1 7500 ? 2286.0 892.5 404.8 .053 1.35 .452 11.48 211 939 4.50 114.30 1467a 8 e1 7500 ? 2286.0 1477.5 670.8 .053 1.35 .523 13.28 390 1735 5.50 139.70 1468a 12 e1 5000 ? 1524.0 1375.0 624.3 .064 1.63 .673 17.09 560 2491 6.75 171.45 3034a 16 e1 bulk ?? bulk .066 1.68 .713 18.11 640 2847 7.25 184.15 1471a 24 e1 2500 ? 762.0 1292.5 586.3 .074 1.88 .932 23.67 1105 4916 9.25 234.95 1472a 36 e1 1250 ? 381.0 910.0 413.1 .074 1.88 1.062 26.97 1644 7313 10.50 266.70 3041a 50 e1 bulk ?? bulk .074 1.88 1.240 31.50 2240 10049 12.75 323.85 individually shielded + overall beldfoil (100% coverage) ?pvc insulation ?black pvc jacket (other options below) 1474a 2 e1 7500 ? 2286.0 720.0 326.9 .053 1.35 .408 10.16 149 663 4.00 101.60 1475a 4 e1 7500 ? 2286.0 1065.0 483.1 .053 1.35 .468 11.89 267 1188 4.75 120.65 1476a 8 e1 5000 ? 1524.0 1185.0 538.0 .053 1.35 .594 15.10 501 2229 6.00 152.40 1477a 12 e1 5000 ? 1524.0 1740.0 789.3 .064 1.63 .737 18.72 779 3465 7.25 184.15 3035a 16 e1 bulk ?? bulk .064 1.63 .836 21.20 725 3225 8.50 215.90 1480a 24 e1 2500 ? 762.0 1712.5 777.5 .074 1.88 1.019 25.88 1443 6419 10.25 260.35 5000 ? 1524.0 3390.0 1539.1 1481a 36 e1 bulk ?? bulk .074 1.88 1.163 29.54 2148 9556 11.75 298.45 3042a 50 e1 bulk ?? bulk .084 2.13 1.389 35.28 2935 13057 14.00 355.60 e1 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs lbs. kg inch mm rip cord rip cord drain wires drain wire communication wire communication wire nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc/pvc cd xlpe/pvc kl tpe/tpe qr xlpe/cpe st xlpe/haloarrest **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets industrial automation & process control cables 18.48 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com 18 awg triads stranded (19x30) tinned copper conductors ?twisted triads unshielded ?pvc insulation ?chrome pvc jacket 9493 1 e1 u-500 u-152.4 20.0 9.1 .037 .94 .242 6.15 62 276 2.25 57.15 u-1000 u-304.8 38.0 17.2 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9365 1 e1 u-500 u-152.4 22.0 10.0 .037 .94 .245 6.22 74 329 2.50 63.50 u-1000 u-304.8 43.0 19.5 18 awg triads stranded (7x26) bare copper conductors ?twisted triads overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (see chart below for other options) 1036a 1 e1 1000 304.8 43.0 19.5 .037 .94 .236 5.99 90 400 2.40 60.96 10000 ? 3048.0 430.0 195.1 3027a 2 e1 bulk ?? bulk .055 1.40 .420 10.67 165 734 4.25 107.95 3030a 4 e1 bulk ?? bulk .055 1.40 .521 13.20 240 1068 4.50 114.30 3032a 8 e1 bulk ?? bulk .064 1.63 .580 14.70 501 2229 5.75 146.05 3036a 16 e1 bulk ?? bulk .077 1.96 .900 22.86 1050 4671 9.00 228.60 3038a 24 e1 bulk ?? bulk .077 1.96 1.020 25.91 1450 6450 10.25 260.35 individually shielded + overall beldfoil (100% coverage) ?pvc insulation ?black pvc jacket (other options below) 3028a 2 e1 bulk ?? bulk .055 1.40 .450 11.43 175 779 4.50 114.30 3031a 4 e1 bulk ?? bulk .053 1.35 .533 13.50 255 1134 5.25 133.35 3033a 8 e1 bulk ?? bulk .064 1.63 .654 16.50 560 2491 6.50 165.10 3068a 12 e1 bulk ?? bulk .063 1.60 .840 21.30 800 3559 8.50 215.90 3037a 16 e1 bulk ?? bulk .074 1.88 .974 24.70 1320 5872 10.50 266.70 3039a 24 e1 bulk ?? bulk .074 1.88 1.200 30.50 1620 7207 11.25 285.75 e1 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of triads lbs. kg inch mm rip cord rip cord drain wire drain wire drain wires rip cord rip cord communication wire communication wire nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc/pvc cd xlpe/pvc kl tpe/tpe qr xlpe/cpe st xlpe/haloarrest **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
industrial automation & process control cables 18.49 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs lbs. kg inch mm 16 awg pairs stranded (19x29) tinned copper conductors ?twisted pairs unshielded ?pvc insulation ?chrome pvc jacket 9410 1 e2 u-500 u-152.4 18.5 8.4 .037 .94 .254 6.45 78 347 2.50 63.50 u-1000 u-304.8 36.0 16.3 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9316 1 e2 u-500 u-152.4 21.5 9.8 .037 .94 .256 6.50 90 400 2.50 63.50 u-1000 u-304.8 41.0 18.6 16 awg pairs stranded (7x24) bare copper conductors ?twisted pairs unshielded ?pvc insulation ?black pvc jacket (see chart below for other insulation and jacket options) 1035a 1 e1 1000 304.8 40.0 18.1 .037 .94 .254 6.45 71 318 2.50 63.50 10000 ? 3048.0 400.0 181.4 overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (see chart below for other options) 1030a 1 e1 1000 304.8 46.0 20.9 .037 .94 .257 6.53 94 418 2.50 63.50 10000 ? 3048.0 480.0 217.7 3043a 2 e1 bulk ?? bulk .053 1.35 .437 11.10 83 369 4.50 114.30 1528a 3 e1 7500 ? 2286.0 967.5 438.9 .053 1.35 .457 11.61 250 1112 4.75 120.65 1484a 4 e1 7500 ? 2286.0 1200.0 544.8 .053 1.35 .495 12.57 330 1468 5.00 127.00 1485a 8 e1 7500 ? 2286.0 2010.0 911.7 .053 1.35 .597 15.16 616 2740 6.00 152.40 1486a 12 e1 5000 ? 1524.0 1965.0 892.1 .064 1.63 .741 18.80 892 3968 7.50 190.50 3050a 16 e1 bulk ?? bulk .064 1.63 .831 21.10 661 2940 8.50 215.90 1489a 24 e1 1250 ? 381.0 923.8 419.4 .074 1.88 1.032 26.20 1749 7780 10.50 266.70 1490a 36 e1 1250 ? 381.0 1313.8 596.4 .074 1.88 1.178 29.80 2606 11592 11.75 298.45 3056a 50 e1 bulk ?? bulk .088 2.24 1.550 39.37 3615 16082 15.50 393.70 individually shielded + overall beldfoil shield (100% coverage) pvc insulation black pvc jacket (options below) 1492a 2 e1 7500 ? 2286.0 885.0 401.8 .053 1.35 .450 11.43 232 1032 4.50 114.30 1493a 4 e1 7500 ? 2286.0 1387.5 629.4 .055 1.40 .512 13.11 420 1868 5.00 127.00 1494a 8 e1 5000 ? 1524.0 1640.0 743.9 .066 1.68 .687 17.50 795 3537 7.00 177.80 1495a 12 e1 2500 ? 762.0 1202.5 545.5 .066 1.68 .822 20.73 1170 5205 8.25 209.55 3051a 16 e1 bulk ?? bulk .074 1.88 .936 23.77 661 2940 10.00 254.00 1498a 24 e1 5000 ? 1524.0 4340.0 1968.6 .074 1.88 1.149 29.18 2296 10214 11.50 292.10 1499a 36 e1 bulk ?? bulk .084 2.13 1.334 33.88 3167 14088 13.50 342.90 3057a 50 e1 bulk ?? bulk .088 2.24 1.600 40.64 2066 9190 16.00 406.40 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. rip cord communication wire rip cord rip cord rip cord rip cord communication wire drain wires drain wire drain wire nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc/pvc cd xlpe/pvc kl tpe/tpe qr xlpe/cpe st xlpe/haloarrest **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets industrial automation & process control cables 18.50 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of triads lbs. kg inch mm 16 awg triads stranded (19x29) tinned copper conductors ?twisted triads unshielded ?pvc insulation ?chrome pvc jacket 9494 1 e1 u-500 u-152.4 24.5 11.1 .037 .94 .268 6.81 91 405 2.75 69.85 u-1000 u-304.8 48.0 21.8 overall beldfoil shield (100% coverage)?pvc insulation ?chrome pvc jacket 9366 1 e1 u-500 u-152.4 27.5 12.5 .037 .94 .270 6.86 116 516 2.75 69.85 u-1000 u-304.8 54.0 24.5 16 awg triads stranded (7x24) bare copper conductors ?twisted triads unshielded ?pvc insulation ?black pvc jacket (see chart below for other options) 1034a 1 e1 1000 304.8 51.0 23.2 .037 .94 .268 6.81 107 476 2.75 69.85 4000 ? 1219.2 208.0 94.4 overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (see chart below for other options) 1031a 1 e1 1000 304.8 58.0 26.4 .037 .94 .271 6.88 130 578 2.75 69.85 10000 ? 3048.0 610.0 276.7 3044a 2 e1 bulk ?? bulk .053 1.35 .483 12.27 259 1152 4.75 120.65 3046a 4 e1 bulk ?? bulk .053 1.35 .570 14.40 473 2104 5.75 146.05 3048a 8 e1 bulk ?? bulk .063 1.60 .760 19.30 902 4013 7.50 190.50 3052a 16 e1 bulk ?? bulk .074 1.88 1.032 26.21 1758 7821 11.25 285.75 3054a 24 e1 bulk ?? bulk .074 1.88 1.180 29.90 2615 11633 11.75 298.45 individually shielded + overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (options below) 3045a 2 e1 bulk ?? bulk .053 1.35 .506 12.80 304 1352 5.00 127.00 3047a 4 e1 bulk ?? bulk .053 1.35 .569 14.45 563 2505 6.00 152.40 3049a 8 e1 bulk ?? bulk .064 1.63 .764 19.41 1081 4809 8.00 203.20 3069a 12 e1 bulk ?? bulk .074 1.88 .998 25.35 1500 6673 10.00 254.00 3053a 16 e1 bulk ?? bulk .074 1.88 1.150 29.20 2117 9418 11.50 292.10 3055a 24 e1 bulk ?? bulk .084 2.13 1.320 33.53 3153 14026 13.25 336.55 e1 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. rip cord rip cord rip cord rip cord drain wire drain wires communication wire rip cord communication wire drain wire nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cmg cec: cmg ft4 ieee 1202/383 icea t-29-520 conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc/pvc cd xlpe/pvc kl tpe/tpe qr xlpe/cpe st xlpe/haloarrest **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
industrial automation & process control cables 18.51 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs/ triads lbs. kg inch mm 14 awg pairs stranded (42x30) tinned copper conductors ?twisted pairs unshielded ?pvc insulation ?chrome pvc jacket 9411 1 e2 u-500 u-152.4 28.0 12.7 .042 1.07 .322 8.18 124 552 3.25 82.55 1000 304.8 60.0 27.3 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9314 1 e2 u-500 u-152.4 32.5 14.7 .042 1.07 .324 8.23 140 623 3.25 82.55 1000 304.8 66.0 29.9 14 awg triads stranded (42x30) tinned copper conductors ?twisted triads unshielded ?pvc insulation ?chrome pvc jacket 9495 1 e1 500 152.4 43.5 19.7 .042 1.07 .340 8.64 186 827 3.50 88.90 1000 304.8 86.0 39.0 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9367 1 e1 500 152.4 43.5 19.7 .042 1.07 .343 8.71 188 836 3.50 88.90 1000 304.8 88.0 40.0 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. rip cord rip cord rip cord rip cord drain wire drain wire nec: pltc, itc, cl3r cec: ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cl3r cec: ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cl3r cec: ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cl3r cec: ft4 ieee 1202/383 icea t-29-520
ul instrumentation cable 300v power-limited tray cables industrial grade sunlight- and oil-resistant jackets industrial automation & process control cables 18.52 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs/ triads lbs. kg inch mm 12 awg pairs stranded (65x30) tinned copper conductors ?twisted pairs unshielded ?pvc insulation ?chrome pvc jacket 9412 1 e2 500 152.4 41.5 18.8 .042 1.07 .370 9.40 197 876 4.25 107.95 1000 304.8 83.0 37.7 overall beldfoil shield (100% coverage) ?pvc insulation ?chrome pvc jacket 9312 1 e2 500 152.4 49.0 22.3 .042 1.07 .373 9.47 225 1001 4.25 107.95 1000 304.8 96.0 43.6 12 awg triads stranded (7x20) bare copper conductors ?twisted triads overall beldfoil shield (100% coverage) ?pvc insulation ?black pvc jacket (see chart below for other options) 3102a 1 e1 bulk ? bulk .053 1.35 .432 11.00 315 1401 3.50 88.90 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. ? bulk = check length available for specific construction. rip cord rip cord rip cord drain wire drain wire nec: pltc, itc, cl3r cec: ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cl3r cec: ft4 ieee 1202/383 icea t-29-520 nec: pltc, itc, cl3r cec: ft4 ieee 1202/383 icea t-29-520 conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc/pvc cd xlpe/pvc kl tpe/tpe qr xlpe/cpe st xlpe/haloarrest **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
industrial automation & process control cables 18.53 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable thermocouple extension cables and thermocouple wire ?overview construction thermocouple extension cable conductor material determined by the thermocouple extension wire type. fep or pvc insulated with fep or pvc jacket. nylon rip cord included in all pvc-jacketed thermocouple extension cables. communi- cation wire included on all multi-pair, pvc constructions ?22 awg (7x30) bare copper orange pvc insulation. note: the temperature ranges in table a are applicable only to the thermocouple conductors and not to the cable. the cable must never be exposed to temperatures higher than the maximum temperature ratings shown in table b. table b: other insulation/jacket options application unshielded parallel non-shielded extension wire may be utilized in low noise environments when recommended by the instrument manufacturer. overall shield recommended, except in areas where high voltage and current sources create excessive noise interference. the beldfoil shield with drain wire provides 100% coverage for maximum shield effectiveness. individually shielded individually shielded pairs are recommended for use in applications where optimum noise rejection is required. pvc insulated, pvc jacketed cable specifications ul subject 13 ul 1685 (ul 1581) vertical tray flame test comparable to ieee 383-1974 (70,000 btu) flame test ansi/mc 96.1?982 nec cmg nec type pltc listed, which is approved for cable tray use in class 1, division 2, hazardous areas and non-hazardous areas, cable trays, raceways, conduit and supported by messenger wires. nec type itc listed, which is approved for cable tray use, raceways hazardous locations according to articles 501, 502, 503 and 504; or as aerial on a cable messenger, and under raised floors in control rooms and rack rooms where arranged to prevent damage to the cable. usages are allowed based on qualified persons servicing all installations. pvc/pvc constructions are cmg, ft4, ieee 1202 and ieee 383-2003 rated, and meet icea t-29-520 flame test. ul 1277 tc versions approved for use in class 1 trays available as special. shielded twisted pair (fep insulated, fep jacketed cable specifications) ul subject 13 nfpa 262 (ul 910 steiner tunnel flame test) comparable to ft6 flame test ansi/mc 96.1?982 nec type cl3p/pltc listed, which is approved for use in ducts, plenums and other space used for environmental air. ul 1277 tc versions approved for use in class 1 trays available as special. thermocouple wire conductor material determined by the thermocouple type. fep insulated and jacketed flat constructions. fep thermocouple wire is impervious to chemical attack and is flame retardant. jacket color limits of error standard (?) temperature range (?) (conductor only) positive ( + ) negative ( - ) conductor identification ansi symbol ul listed for pltc insulation/jacket max. temp rating xlpe/pvc 90? xlpe/cpe 90? pvc/pvc 105? pvc/cpe 105? pe/pvc 75? fpe/pvc 75? tpe/tpe 105? xlpe/haloarrest ? 90? fep/fep 200? e 0 to 340 ?.7? brown purple red chromel constantan 340 to 540 ?50% non-magnetic silver color j 0 to 293 ?.2? brown white red iron constantan 293 to 480 ?75% magnetic non-magnetic k 0 to 293 ?.2? brown yellow red chromel alumel 293 to 980 ?75% non-magnetic magnetic t 0 to 133 ?.0? brown blue red copper constantan 133 to 260 ?75% copper color non-magnetic ex 0 to 200 ?.7? purple purple red chromel constantan jx 0 to 200 ?.2? black white red iron constantan kx 0 to 200 ?.2? yellow yellow red chromel alumel tx 0 to 100 ?.0? blue blue red copper constantan limits of error per ansi mc96.1-1982. limits shown do not include system or installation error. percentages refer to the temper ature being measured. *the temperature range and limits of error are for standard grade thermocouples, reference ansi mc96.1-1982 for special grade t hermocouples. the temperature ranges for type e, j, k and t thermocouple wires listed above pertain to 20 awg wire. additional constructions available upon request. table a: thermocouple identification and limits of error ?reference junction 0? * positive ( + ) negative ( - ) insulation color code standard lengths may be subject to tolerance. custom lengths may be available upon request. contact the belden electronics division customer service department for additional information. 1-800-belden-1
industrial automation & process control cables 18.54 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable thermocouple extension cables industrial grade sunlight- and oil-resistant jackets 20 awg pairs solid conductors ? (see chart on page 18.53 for conductor specifications by ansi type) overall beldfoil shield (100% coverage) ?pvc insulation ?pvc jacket 3111a jx 1 white, red black 5000 ? 1524.0 115.0 52.2 .016 .41 .206 5.23 3112a kx 1 yellow, red yellow 5000 ? 1524.0 120.0 54.5 .016 .41 .206 5.23 3113a tx 1 blue, red blue 5000 ? 1524.0 115.0 52.2 .016 .41 .206 5.23 individually shielded + overall beldfoil shield (100% coverage) ? pvc insulation ?pvc jacket 3115a jx 2 white, red black 5000 ? 1524.0 315.0 143.0 .016 .41 .332 8.43 1006a jx 4 white, red black 5000 ? 1524.0 480.0 217.9 .016 .41 .383 9.73 1012a kx 4 yellow, red yellow 5000 ? 1524.0 530.0 240.6 .016 .41 .383 9.73 1013a kx 8 yellow, red yellow 5000 ? 1524.0 825.0 374.6 .016 .41 .503 12.78 1014a kx 12 yellow, red yellow 5000 ? 1524.0 1195.0 542.5 .016 .41 .603 15.32 16 awg pairs solid conductors ? (see chart on page 18.53 for conductor specifications by ansi type) overall beldfoil shield (100% coverage) ?pvc insulation ?pvc jacket 1101a ex 1 purple, red purple 10000 ? 3048.0 450.0 204.3 .017 .43 .248 6.30 1000a jx 1 white, red black 1000 304.8 42.0 19.1 .017 .43 .248 6.30 10000 ? 3048.0 420.0 190.7 1018a kx 1 yellow, red yellow 1000 304.8 42.0 19.1 .017 .43 .248 6.30 10000 ? 3048.0 420.0 190.7 1023a tx 1 blue, red blue 10000 ? 3048.0 450.0 204.3 .017 .43 .248 6.30 multiple pair cables have each pair numbered for ease of identification. ? final put-up length may vary ?0% from length shown. jacket color inch mm nominal od standard lengths ft. color code no. of pairs inch mm insulation thickness part no. description m standard unit weight ansi type lbs. kg rip cord drain wire rip cord drain wire drain wires rip cord communication wire 300v 105? nec: pltc, itc, cmg cec: cmg ft4 icea t-29-520 ieee 1202/383 300v 105? nec: pltc, itc, cmg cec: cmg ft4 icea t-29-520 ieee 1202/383 300v 105? nec: pltc, itc, cmg cec: cmg ft4 icea t-29-520 ieee 1202/383
industrial automation & process control cables 18.55 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable high-temperature thermocouple extension cables and thermocouple wire industrial grade sunlight- and oil-resistant jackets high-temp extension cable ?20 awg solid conductors ? (see chart on page 18.53 for conductor specifications by ansi type) plenum ?unshielded ?fep insulation ?fep jacket 300v 200? 83932 kx 2/c yellow, red yellow 500 ? 152.4 6.5 3.0 .010 .25 .076 1.93 nec: pltc, cl3p 1000 ? 304.8 12.0 5.4 xx .128 3.25 83934 tx 2/c blue, red blue 1000 ? 304.8 13.0 6.0 .010 .25 .076 1.93 xx .128 3.25 high-temp extension cable ?20 awg stranded (7x28) conductors ? (see chart on page 18.53 for conductor specifications by ansi type) plenum ?unshielded ?fep insulation ?fep jacket 300v 200? 83930 jx 2/c white, red black 500 ? 152.4 7.5 3.4 .010 .25 .082 2.08 nec: pltc, cl3p 1000 ? 304.8 13.0 6.0 xx .140 3.56 plenum ?overall beldfoil shield (100% coverage) ?fep insulation ?fep jacket 300v 200? 83955 ex 1 pr. purple, red purple 500 ? 152.4 9.0 4.1 .010 .25 .145 3.68 nec: pltc, cl3p 1000 ? 304.8 16.0 7.3 83950 jx 1 pr. white, red black 500 ? 152.4 9.5 4.3 .010 .25 .145 3.68 1000 ? 304.8 16.0 7.3 83952 kx 1 pr. yellow, red yellow 500 ? 152.4 9.5 4.3 .010 .25 .145 3.68 1000 ? 304.8 16.0 7.3 83954 tx 1 pr. blue, red blue 500 ? 152.4 9.0 4.1 .010 .25 .145 3.68 1000 ? 304.8 17.0 7.7 high-temp extension cable ?16 awg pairs solid conductors ? (see chart on page 18.53 for conductor specifications by ansi type) plenum ?overall beldfoil shield (100% coverage) ?fep insulation ?fep jacket 300v 200? 1114a ex 1 purple, red purple 5000 ? 1524.0 160.0 72.6 .010 .25 .172 4.37 nec: pltc, cl3p 1115a jx 1 white, red black 5000 ? 1524.0 155.0 70.4 .010 .25 .172 4.37 1116a kx 1 yellow, red yellow 5000 ? 1524.0 160.0 72.6 .010 .25 .171 4.34 1117a tx 1 blue, red blue 5000 ? 1524.0 160.0 72.6 .010 .25 .172 4.37 high-temp extension cable ?16 awg pairs stranded (7x24) conductors ? (see chart on page 18.53 for conductor specifications by ansi type) plenum ?overall beldfoil shield (100% coverage) ?fep insulation ?fep jacket 300v 200? 83951 jx 1 white, red black 500 ? 152.4 16.0 7.3 .010 .25 .189 4.80 nec: pltc, cl3p 1000 ? 304.8 35.0 15.9 83953 kx 1 yellow, red yellow 500 ? 152.4 16.0 7.3 .010 .25 .187 4.75 1000 ? 304.8 32.0 14.5 high-temp thermocouple wire ?20 awg solid conductors ? (see chart on page 18.53 for conductor specifications by ansi type) plenum ?unshielded ?fep insulation ?fep jacket 300v 200? 83915 e 2/c purple, red brown 500 ? 152.4 7.0 3.2 .010 .25 .076 1.93 nec: pltc, cl3p 1000 ? 304.8 13.0 6.0 xx .128 3.25 83900 j 2/c white, red brown 100 30.5 2.1 1.0 .010 .25 .076 1.93 500 ? 152.4 7.0 3.2 xx 1000 ? 304.8 13.0 6.0 .128 3.25 83905 k 2/c yellow, red brown 100 30.5 2.1 1.0 .010 .25 .076 1.93 500 ? 152.4 7.0 3.2 xx 1000 ? 304.8 12.0 5.4 .128 3.25 83910 t 2/c blue, red brown 100 30.5 2.1 1.0 .010 .25 .076 1.93 500 ? 152.4 7.0 3.2 xx 1000 ? 304.8 12.0 5.4 .128 3.25 fep = fluorinated ethylene-propylene multiple pair cables have each pair numbered for ease of identification. ? final put-up length may vary ?0% from length shown. jacket color inch mm nominal od standard lengths ft. color code no. of pairs/ cond. inch mm insulation thickness part no. description m standard unit weight ansi type lbs. kg drain wire drain wire drain wire
industrial automation & process control cables 18.56 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 600v tray cables ?overview construction soft annealed bare or tinned copper conductors. pvc insulated with a nylon overcoat, 90? pvc jacket, tfn, tffn or thhn style singles. nylon rip cord included in all pvc-nylon/pvc instrumentation cables. application these cables are suitable for installation in wet or dry locations. cable jackets are resistant to sunlight, moisture and vapor penetration. the cables can be used in raceways, and (supported by messenger wire), outdoor applications and direct burial applications. unshielded twisted non-shielded instrument pairs provide a minimal od allowing greater tray and conduit fill. non-shielded instrument pairs may be utilized when recommended by the instrument manufacturer and used in a metallic conduit. overall shield recommended for use in instrumentation applications where signals are transmitted in excess of 100 millivolts except in areas where high voltage and current sources creates excessive noise interference. the beldfoil shield with drain wire provides 100% coverage for maximum shield effectiveness. copper tape shield available upon request. individually shielded and overall shielded individually shielded pairs or triads with an overall shield are recommended for use in instrumentation applications where optimum noise rejection is required. individual pair/triad shields are fully isolated from each other and contain a separate drain wire for grounding, to provide maximum protection from crosstalk and common mode interference. cables with an overall shield provide additional electrostatic noise protection. specifications ul subject 1277 tc ul 1685 (ul1581) vertical tray flame test comparable to ieee 383-1974 (70,000 btu/hr.) flame test nec type tc listed, which is approved for cable tray use in class 1, division 2 areas, per nec articles 340, 318 and 501 and for class 1 circuits as permitted in article 725 pvc-nylon/pvc constructions are nec t ype nplf listed, which is approved for use in non power-limited fire protective signaling circuits, per nec article 760 pvc-nylon/pvc, xlpe/pvc and xlpe/cpe constructed cables meet ieee 1202/ieee 383-2003/ft4 (70,000 btu) flame test xlpe/haloarrest cables are ul 1277 tc-ls rated tc-er rated cables as an option, belden offers all pvc-nylon/ pvc, xlpe/pvc and xlpe/cpe jacketed tray cables with a tc-er (exposed run) rating, formerly referred to as open wiring. per nec article 336, a tc-er rated cable may be installed in an industrial establishment between a cable tray and the utilization equipment or device. a tc-er rated cable must meet the crush and impact require- ments of ul type mc cable. by eliminating the need for metal conduit and/or armor, using a tc-er rated cable results in savings in both installation and maintenance. mc cable ratings optional customize any 600v tc instrumentation cable, with armor and a full-sized ground. see chart below to specify. armor code material 2 aluminum interlock 3 steel interlock overall jacket code material 1 pvc 3 cpe 4 tpe 5 hdpe 6 oil res ii 7 haloarrest 1 2 3456 a overall armor core conductor, jacket type 4-digit insulation, type part no. inner jacket 600v tc type instrumentation to specify mc rated cable standard lengths may be subject to tolerance. custom lengths may be available upon request. contact the belden electronics division customer service department for additional information. 1-800-belden-1. bare tinned insulation/jacket ab pvc-nylon/pvc cd xlpe/pvc ef frpo/pvc gh xlpe/tpe kl tpe/tpe mn pvc-nylon/oil res ii qr xlpe/cpe st xlpe/haloarrest *for 1000 and 3000 series cables only. 1234 a start add or with replace part letter no. code to specify: tray cable construction options ul listed for mc and tc insulation/jacket flame tests ratings* max. temp rating wet dry pvc-nylon/pvc 75? 90? ul 1685 icea s-73-532 (thhn or thwn) ft4/ieee 1202/383 icea s-61-402 14 awg & larger icea t-29-520 pvc-nylon/pvc n/a 90? ul 1685 icea s-73-532 (tfn or tffn) ft4/ieee 1202/383 icea s-61-402 16 & 18 awg icea t-29-520 xlpe/pvc or cpe 90? 90? ul 1685 icea s-73-532 (xhhw?) ft4/ieee 1202/383 icea s-66-524 14 awg & larger vw-1 rated singles icea t-29-520 xlpe/pvc or cpe 75? 75? ul 1685 icea s-73-532 (rfh?) ft4/ieee 1202/383 icea s-66-524 16 & 18 awg vw-1 rated singles icea s-82-552 icea t-29-520 frpo/pvc 75? ul 1685 18 awg & larger tpe/tpe 75? 90? ul 1685 frpo/pvc 75? 90? ul 1685 xlpe/haloarrest ? 90? 90? ul 1685 tc-ls (xhhw-2) icea t-29-520 14 awg & larger ft4/ieee 1202/383 xlpe/haloarrest 75? 75? ul 1685 tc-ls (rfh-2) icea t-29-520 16 & 18 awg ft4/ieee 1202/383 fep/pvc 90? 90? ul 1685 cpe = chlorinated polyethylene fep = fluorinated ethylene-propylene frpo = flame-retardant polyolefin pvc = polyvinyl chloride tpe = thermoplastic elastomer xlpe = cross-linked polyethylene *applicable to tc-rated cables only. conductor, insulation and jacket options *
industrial automation & process control cables 18.57 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 600v tray cables industrial grade sunlight- and oil-resistant jackets 18 awg pairs stranded (19x30) tinned copper conductors ?twisted pairs unshielded ?pvc/nylon insulation ?black pvc jacket 9486 1 e2 1000 304.8 43.0 19.5 .048 1.22 .275 6.99 50 222 2.75 69.85 overall beldfoil shield (1 00% coverage) pvc/nylon insulation ?black pvc jacket 9341 1 e2 500 152.4 22.0 10.0 .048 1.22 .276 7.01 63 280 2.75 69.85 1000 304.8 43.0 19.5 18 awg pairs stranded (7x26) bare copper conductors ?twisted pairs overall beldfoil shield (1 00% coverage) pvc/nylon insulation ?black pvc jacket (see chart below for other options) 1120a 1 e2 10000 ? 3048.0 450.0 204.3 .048 1.22 .278 7.06 59 262 2.80 71.12 3088a 1 e1 10000 ? 3048.0 510.0 231.3 .048 1.22 .278 7.06 67 298 2.80 71.12 1063a 2 e1 10000 ? 3048.0 790.0 358.3 .053 1.35 .407 10.34 112 498 4.10 104.14 1064a 4 e1 7500 ? 2286.0 892.5 404.8 .053 1.35 .470 11.94 202 899 4.70 119.38 1065a 8 e1 7500 ? 2286.0 1650.0 748.4 .064 1.63 .599 15.21 381 1695 6.00 152.40 1066a 12 e1 5000 ? 1524.0 1520.0 689.5 .064 1.63 .717 18.21 560 2491 7.20 182.88 1067a 16 e1 5000 ? 1524.0 1905.0 864.1 .064 1.63 .793 20.14 739 3287 8.00 203.20 1068a 24 e1 2500 ? 762.0 1487.5 674.7 .084 2.13 1.017 25.83 1098 4884 10.30 261.62 1087a 36 e1 1250 ? 381.0 1005.0 455.9 .084 2.13 1.178 29.97 1635 7273 11.70 297.18 1088a 50 e1 bulk ?? bulk .084 2.13 1.446 36.73 2262 10062 14.50 368.30 individually shielded + overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (options below) 1048a 2 e1 7500 ? 2286.0 622.5 282.4 .048 1.22 .381 9.68 140 623 3.80 96.52 1049a 4 e1 7500 ? 2286.0 1057.5 479.7 .053 1.35 .489 12.42 258 1148 4.90 124.46 1050a 8 e1 7500 ? 2286.0 1965.0 891.3 .064 1.63 .654 16.61 350 1557 6.60 167.64 1051a 12 e1 5000 ? 1524.0 1915.0 868.6 .064 1.63 .785 19.94 728 3238 7.90 200.66 1052a 16 e1 2500 ? 762.0 1267.5 574.9 .084 2.13 .898 22.81 963 4284 9.00 228.60 1053a 24 e1 2500 ? 762.0 1907.5 865.2 .084 2.13 1.115 28.32 1434 6379 11.10 281.94 1054a 36 e1 1250 ? 381.0 1270.0 576.1 .084 2.13 1.299 32.99 2139 9515 13.00 330.20 1038a 50 e1 bulk ?? bulk .084 2.13 1.527 38.79 2962 13176 15.30 388.62 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs lbs. kg inch mm conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc-nylon/pvc cd xlpe/pvc ef frpo/pvc gh xlpe/tpe kl tpe/tpe mn pvc-nylon/oil res ii qr xlpe/cpe st xlpe/haloarrest ? **for 1000 and 3000 series cables only. rip cord rip cord rip cord rip cord drain wire drain wires drain wire nec: tc, nplf icea s-73-532, icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532, icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
18 awg pairs stranded (7x26) bare copper conductors ?twisted pairs overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (green ground) 3088ae 1 e1 1000 3048.0 63.0 28.6 .048 1.22 .340 8.64 80 356 3.40 86.36 5000 ? 1524.0 320.0 145.3 overall beldfoil shield (100% coverage) ?xlpe insulation ?black pvc jacket (green ground) 3088ce 1 e1 1000 3048.0 66.0 30.0 .048 1.22 .340 8.64 80 356 3.40 86.36 5000 ? 1524.0 375.0 170.3 18 awg triads stranded (7x26) bare copper conductors ?twisted triads overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (see chart below for other options) 1121a 1 e2 500 ? 152.4 27.5 12.5 .048 1.22 .282 7.16 90 400 2.75 69.85 1000 ? 304.8 53.0 24.0 10000 ? 3048.0 560.0 254.0 3089a 1 e1 10000 ? 3048.0 590.0 267.6 .048 1.22 .284 7.21 90 400 2.75 69.85 individually shielded + overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (options below) 3064a 2 e1 bulk ?? bulk .048 1.22 .493 12.52 185 823 4.75 120.65 1093a 4 e1 7500 ? 2286.0 1545.0 700.8 .063 1.60 .577 14.66 347 1544 6.00 152.40 1094a 8 e1 5000 ? 1524.0 1755.0 796.1 .063 1.60 .745 18.92 672 2989 7.50 190.50 1095a 12 e1 2500 ? 762.0 1320.0 598.8 .084 2.13 .944 23.98 997 4435 9.75 247.65 5000 ? 1524.0 2875.0 1304.1 3066a 16 e1 bulk ?? bulk .084 2.13 1.046 26.57 1322 5881 10.50 266.70 1096a 24 e1 bulk ?? bulk .084 2.13 1.284 32.61 1971 8767 13.00 330.20 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. industrial automation & process control cables 18.58 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 600v tray cables industrial grade sunlight- and oil-resistant jackets conductor, insulation and jacket options bare tinned insulation/jacket ab pvc-nylon/pvc cd xlpe/pvc ef frpo/pvc gh xlpe/tpe kl tpe/tpe mn pvc-nylon/oil res ii qr xlpe/cpe st xlpe/haloarrest ? standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs/ triads lbs. kg inch mm rip cord drain wire drain wires rip cord nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify: rip cord drain wire nec: tc-er , nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc-er , nplf icea s-73-532 icea s-66-524 icea t-29-520 ft4/ieee 1202/383 ground rip cord drain wire ground
industrial automation & process control cables 18.59 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 600v tray cables industrial grade sunlight- and oil-resistant jackets standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs lbs. kg inch mm 16 awg pairs stranded (19x29) tinned copper conductors ?twisted pairs unshielded ?pvc/nylon insulation ?black pvc jacket 9487 1 e2 500 152.4 25.5 11.6 .048 1.22 .295 7.49 70 311 3.00 76.20 1000 304.8 54.0 24.5 overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket 9342 1 e2 500 152.4 27.5 12.7 .048 1.22 .296 7.52 105 467 3.00 76.20 1000 304.8 56.0 25.4 16 awg pairs stranded (7x24) bare copper conductors ?twisted pairs overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (see chart below for other options) 1118a 1 e2 10000 ? 3048.0 550.0 249.5 .047 1.19 .294 7.47 105 467 3.00 76.20 3090a 1 e1 2500 ? 762.0 150.0 68.0 .047 1.19 .295 7.49 105 467 3.00 76.20 1069a 2 e1 7500 ? 2286.0 712.5 323.2 .047 1.19 .456 11.58 179 796 4.60 116.84 1527a 3 e1 7500 ? 2286.0 1042.5 472.9 .047 1.19 .482 12.24 241 1072 4.80 121.92 1070a 4 e1 7500 ? 2286.0 1357.5 615.8 .063 1.60 .560 14.22 321 1428 5.60 142.24 1071a 8 e1 7500 ? 2286.0 2242.5 1017.2 .063 1.60 .676 17.17 607 2700 6.80 172.72 1072a 12 e1 5000 ? 1524.0 1047.5 475.2 .063 1.60 .812 20.63 893 3972 8.10 205.74 1073a 16 e1 2500 ? 762.0 1442.5 654.3 .085 2.16 .946 24.03 1178 5240 9.30 236.22 1074a 24 e1 1250 ? 381.0 2115.0 959.4 .085 2.16 1.158 29.41 1749 7780 11.60 294.64 1089a 36 e1 1250 ? 381.0 1388.7 629.9 .085 2.16 1.321 33.55 2606 11592 13.20 335.28 1090a 50 e1 bulk ?? bulk .085 2.16 1.551 39.40 3606 16040 15.50 393.70 individually shielded + overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (options below) 1055a 2 e1 7500 ? 2286.0 885.0 401.8 .047 1.19 .476 12.09 223 992 4.16 105.66 1037a 3 e1 7500 ? 2286.0 1072.5 486.5 .047 1.19 .504 12.80 290 1290 5.00 127.0 1039a 4 e1 7500 ? 2286.0 1472.5 667.9 .063 1.60 .584 14.83 411 1828 5.80 147.32 1040a 6 e1 5000 ? 1524.0 1435.0 650.9 .063 1.60 .682 17.32 428 1904 6.80 172.72 1041a 8 e1 5000 ? 1524.0 1805.0 818.8 .063 1.60 .738 18.75 786 3496 7.40 187.96 1042a 12 e1 2500 ? 762.0 1327.5 602.2 .085 2.16 .935 23.75 1161 5164 9.40 238.76 1043a 16 e1 2500 ? 762.0 1765.0 800.6 .085 2.16 1.035 26.29 1537 6837 10.40 264.16 1044a 20 e1 2500 ? 762.0 2062.5 935.6 .085 2.16 1.146 29.11 1912 8505 11.50 292.10 1045a 24 e1 1250 ? 381.0 1241.3 563.1 .085 2.16 1.272 32.31 2287 10173 12.70 322.58 1046a 36 e1 bulk ?? bulk .085 2.16 1.454 36.93 3413 15182 14.50 368.30 1047a 50 e1 bulk ?? bulk .120 3.05 1.781 45.24 4726 21022 17.80 452.12 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. rip cord rip cord rip cord rip cord drain wire drain wires drain wire nec: tc, nplf icea s-73-532, icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532, icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 bare tinned insulation/jacket ab pvc-nylon/pvc cd xlpe/pvc ef frpo/pvc gh xlpe/tpe kl tpe/tpe mn pvc-nylon/oil res ii qr xlpe/cpe st xlpe/haloarrest ? conductor, insulation and jacket options ** **for 1000 and 3000 series cables only. 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
ul instrumentation cable 600v tray cables industrial grade sunlight- and oil-resistant jackets industrial automation & process control cables 18.60 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs/ triads lbs. kg inch mm 16 awg pairs stranded (7x24) bare copper conductors ?twisted pairs overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (green ground) 3090ae 1 e1 1000 304.8 65.0 29.5 .048 1.22 .390 9.91 130 578 3.90 99.06 5000 ? 1524.0 340.0 154.4 overall beldfoil shield (100% coverage) ?xlpe insulation ?black pvc jacket (green ground) 3090ce 1 e1 1000 3048.0 81.0 39.8 .048 1.22 .390 9.91 130 578 3.90 99.06 5000 ? 1524.0 450.0 204.3 16 awg triads stranded (7x24) bare copper conductors ?twisted triads overall beldfoil shield (1 00% coverage) pvc/nylon insulation ?black pvc jacket (see chart below for other options) 1119a 1 e2 500 ? 152.4 35.0 15.9 .047 1.19 .310 7.87 129 574 3.10 78.74 1000 ? 304.8 68.0 30.9 10000 ? 3048.0 700.0 317.5 3091a 1 e1 10000 ? 3048.0 750.0 340.2 .047 1.19 .310 7.87 129 574 3.10 78.74 individually shielded + overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (options below) 1097a 4 e1 5000 ? 1524.0 1415.0 641.8 .063 1.60 .640 16.26 554 2464 6.40 162.56 1098a 8 e1 2500 ? 762.0 1350.0 612.4 .085 2.16 .872 22.15 1072 4768 8.70 220.98 1099a 12 e1 2500 ? 762.0 1875.0 850.5 .085 2.16 1.047 26.59 1590 7073 10.50 266.70 3118a 16 e1 bulk ?? bulk .084 2.13 1.234 31.34 1771 7878 12.25 311.15 1100a 24 e1 bulk ?? bulk .085 2.16 1.434 36.42 3144 13985 14.30 363.22 3130a 36 e1 bulk ?? bulk .110 2.79 1.773 45.03 3600 16013 18.00 457.20 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. multiple pair or triad cables have each pair/triad numbered for ease of identification. ? final put-up length may vary ?0% from length shown. ?? bulk = check length available for specific construction. conductor, insulation and jacket options bare tinned insulation/jacket ab pvc-nylon/pvc cd xlpe/pvc ef frpo/pvc gh xlpe/tpe kl tpe/tpe mn pvc-nylon/oil res ii qr xlpe/cpe st xlpe/haloarrest ? rip cord drain wire drain wires rip cord nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify: nec: tc-er , nplf icea s-73-532 icea s-66-524 icea t-29-520 ft4/ieee 1202/383 nec: tc-er , nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 rip cord drain wire ground rip cord drain wire ground
industrial automation & process control cables 18.61 18 industrial cables for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com ul instrumentation cable 600v tray cables industrial grade sunlight- and oil-resistant jackets standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs/ triads lbs. kg inch mm 14 awg pairs stranded (42x30) tinned copper conductors ?twisted pairs unshielded ?pvc/nylon insulation ?black pvc jacket 9488 1 e2 1000 304.8 77.0 34.9 .048 1.22 .359 9.12 107 476 3.75 95.25 overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket 9343 1 e2 500 152.4 42.5 19.1 .048 1.22 .358 9.09 160 712 3.75 95.25 1000 304.8 86.0 39.0 14 awg pairs stranded (7x22) bare copper conductors ?twisted pairs overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (see chart below for other options) 3080a 1 e1 bulk* bulk* .048 1.22 .342 8.69 160 712 3.50 88.90 14 awg triads stranded (7x22) bare copper conductors ?twisted triads overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (see chart below for other options) 3081a 1 e1 bulk* bulk* .048 1.22 .361 9.17 200 890 3.50 88.90 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. *bulk = check length available for specific construction. rip cord rip cord drain wire rip cord drain wire rip cord drain wire conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc-nylon/pvc cd xlpe/pvc ef frpo/pvc gh xlpe/tpe kl tpe/tpe mn pvc-nylon/oil res ii qr xlpe/cpe st xlpe/haloarrest ? **for 1000 and 3000 series cables only. nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:
ul instrumentation cable 600v tray cables industrial grade sunlight- and oil-resistant jackets industrial automation & process control cables 18.62 for more information, contact belden technical support: 1-800-belden-1 ?www.belden.com standard lengths ft. color code mm jacket thickness inch mm nominal od lbs. n maximum pull tension inch part no. description minimum bend radius m standard unit weight no. of pairs/ triads lbs. kg inch mm 12 awg pairs stranded (37x27) tinned copper conductors twisted pairs unshielded ?pvc/nylon insulation ?black pvc jacket 9489 1 e2 1000 304.8 88.0 39.9 .045 1.14 .380 9.65 170 756 3.75 95.25 overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket 9344 1 e2 500 152.4 54.0 24.5 .045 1.14 .384 9.75 253 1125 3.75 95.25 1000 304.8 111.0 50.4 12 awg pairs stranded (7x20) bare copper conductors twisted pairs overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (see chart below for other options) 3103a 1 e1 bulk* bulk* .048 1.22 .380 9.65 253 1125 3.80 96.52 12 awg triads stranded (7x20) bare copper conductors twisted triads overall beldfoil shield (100% coverage) ?pvc/nylon insulation ?black pvc jacket (see chart below for other options) 3104a 1 e1 bulk* bulk* .048 1.22 .401 10.19 315 1401 4.00 101.60 e1, e2 = refer to technical information section for color code. alternate color coding available upon request. *bulk = check length available for specific construction. rip cord rip cord conductor, insulation and jacket options ** bare tinned insulation/jacket ab pvc-nylon/pvc cd xlpe/pvc ef frpo/pvc gh xlpe/tpe kl tpe/tpe mn pvc-nylon/oil res ii qr xlpe/cpe st xlpe/haloarrest ? **for 1000 and 3000 series cables only. drain wire rip cord drain wire rip cord drain wire nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 nec: tc, nplf icea s-73-532 icea s-61-402 icea t-29-520 ft4/ieee 1202/383 1234 a e start add or add for with replace exposed part letter code run rating no. for desired if desired conductor, insulation & jacket to specify:

▲Up To Search▲

Price & Availability of 9368

	To Download 9368 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .